Gardiner 2 Way Close Coupled Jet Hose Assembly

Gardiner 2 Way Close Coupled Jet Hose Assembly

• Helps prevent jet hose catching on door handles, bushes, etc.
• Allows for a ‘loop free’ jet hose assembly
• Jet Hose length will need trimming to fit brush

Brush Compatibility:

• 23-26cm brushes with jet capsules
• 35-45cm brushes fitted with just 1 pair of jet capsules in inner jet position

If using with a new ‘water-through’ angle adapter you will need to lengthen the gooseneck hose on the gooseneck – standard size will need 150mm length and long length will need 220mm

(Brush not included)

Fitting Instructions

1. Remove black stem elbows and push fit into Jet Capsules

2. Place T connector centrally either just above or below brush socket

3. Measure the needed length of the jet hose to fully connect into each stem elbow – cut off excess hose

4. Push-fit jet hose into each stem elbow