Description
New Version – 16 Micro Jet Rinse Bar
- New Single Piece version with improved internal water flow path
- 16 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Supreme)
- Provides over-bristle micro jet rinsing
- Flow rate is about equivalent to a pair of standard pencil or Fanjets – recommended 1.5 – 2lpm
- Jet angle is 3° higher than high flow rinsebar to allow for lower flow rates
- Height of rinse bar can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 41g
- Uses John Guest connections on unit
- Uses standard Brush T Connector and jet hose – optional extra
- Needs 2 longer screws to allow it to be attached between brush body and brush socket (if used on standard brushes, will need 19mm screws. if used on Xtreme will need 16mm)
- Please note: The rinse bar does not come with the brush pictured
Screw Choice:
-
- If using on Ultimate, Super-Lite & Universal brushes then the standard 16mm screws will need replacing with 19mm screws
- If using on Xtreme brushes then the standard 13mm screws will need replacing with 16mm screws
