Supreme Brush 23cm – Stiff c/w 2 x Jet Capsules

£35.00 Ex VAT

New Semi-Translucent Bristles – greater longevity

Please select Jets below

1 in stock

2 x 2mm Pencil Jet Capsules Black c/w Brush

£0.00

291 in stock

2 x Fan Jet Capsule Red 50 Degree c/w brush

£0.00

7 in stock

2 x Fan Jet Capsule 100 Degree Grey c/w brush

£0.00

98 in stock

2 x 3mm Jet Capsules Green c/w Brush

£0.00

2 x 3mm Jet Capsules Green c/w Brush

2 in stock

2 x 1.4mm Jet Capsules Blue c/w Brush

£0.00

2 x 1.4mm Jet Capsules Blue c/w Brush

34 in stock

SKU: SUPS23 Category:

Description

Supreme Brush 23cm – Stiff

Extra wide splaying bristles – feels very soft and easy on the glass whilst also providing some sill cleaning ability. Minimum pressure needed to achieve an easy splay of bristles with low frame impact due to compact & rounded edge stock design.

  • New Semi-Translucent Bristles – greater longevity
  • Longer length, easy-splay bristle design – 190g
  • Dual Trim – ‘Stiff‘ feel
  • Bristles – Inner Stiff/Outer Stiff – best for hot water
  • Suitable for use with water temperatures up to 75°C
  • Comes with 1 set of Jet Capsules of your choice, Jet Hose and T Connector in the price
  • If using fanjets, some bristles may need trimming to allow full spray width
  • Dual Trim – inner bristles are a shorter length – allows for easy splay
  • Stiff Bristles – Suitable for hot water cleaning
  • Stock Dimensions – 232mm x 37mm, Bristle Dimensions – 29cm (11.5″) x 12cm (5″)
  • Large Bristle Splay Area – 348cm² – increases to 448cm² under full working pressure
  • Suitable for rinsing on the glass
  • Weight = 190g (bare brush stock)
  • Comes with 1 set of jet capsules, jet hose and T Connector in the price
  • If using this brush on a pole with a Swivel Gooseneck  – you will need to pull out a little more of the gooseneck hose from the gooseneck and put an O-Clip around it so that it doesn’t pull back through the gooseneck and impede the swivel action, this will also prevent damage to the Jet Capsule
  • If using this brush on a pole equipped with a pull on/off internal flow valve, such as a Univalve  – you will need to have a hose clip or similar fitted above the gooseneck to prevent the gooseneck hose being pulled back into the pole which would tug on the jets and could lead to damage of the jets with long term use. Such damage would not be covered under warranty
  • Six month manufacturing defect warranty