Supreme Brush 23cm – Soft Flocked Tapertec Hybrid

£41.00 Ex VAT

Longer length, easy-splay bristle design – 180g
Dual Trim – ‘Soft’ feel
Bristles – Outer Soft Flocked- Inner Soft TaperTec bristles
Suitable for use with water temperatures up to 30°C
Features the Gardiner Jet Capsule System
Comes with 1 set of jet capsules, jet hose and T Connector in the price
If using fanjets, some bristles may need trimming to allow full spray width

Please select Jets below

9 in stock

2 x 2mm Pencil Jet Capsules Black c/w Brush

£0.00

290 in stock

2 x Fan Jet Capsule Red 50 Degree c/w brush

£0.00

6 in stock

2 x Fan Jet Capsule 100 Degree Grey c/w brush

£0.00

96 in stock

2 x 3mm Jet Capsules Green c/w Brush

£0.00

2 x 3mm Jet Capsules Green c/w Brush

2 in stock

2 x 1.4mm Jet Capsules Blue c/w Brush

£0.00

2 x 1.4mm Jet Capsules Blue c/w Brush

34 in stock

SKU: SUPFTT23 Category:

Description

Supreme™ – Extra wide splaying bristles – feels very soft and easy on the glass whilst also providing some sill cleaning ability. Minimum pressure needed to achieve an easy splay of bristles with low frame impact due to compact & rounded edge stock design.

Dual Trim – inner bristles are a shorter length – allows for easy splay
Soft Bristles
Flocked & NTaperTec Bristles give Super-soft feel on the glass & great cleaning power
Best suited to a precise and minimal pressure working method
Stock Dimensions – 232mm x 37mm, Bristle Dimensions – 29cm (11.5″) x 12cm (5″)
Large Bristle Splay Area – 348cm² – increases to 448cm² under full working pressure
Best for rinsing off the glass
Weight = 180g (bare brush stock)
Features the Gardiner Jet Capsule System
Comes with 1 set of jet capsules, jet hose and T Connector in the price
If using fanjets, some bristles may need trimming to allow full spray width
Suitable for use with water temperatures up to 30°C
If using this brush on a pole with a Swivel Gooseneck – you will need to pull out a little more of the gooseneck hose from the gooseneck and put an O-Clip around it so that it doesn’t pull back through the gooseneck and impede the swivel action, this will also prevent damage to the Jet Capsule
If using this brush on a pole equipped with a pull on/off internal flow valve, such as a Univalve – you will need to have a hose clip or similar fitted above the gooseneck to prevent the gooseneck hose being pulled back into the pole which would tug on the jets and could lead to damage of the jets with long term use. Such damage would not be covered under warranty
Six month manufacturing defect warranty