Supreme Brush 23cm – Stiff c/w 2 x Jet Capsules

£32.00

Longer length, easy-splay bristle design – 190g
Dual Trim – ‘Stiff’ feel
Bristles – Inner Stiff / Outer Stiff – best for hot water
Suitable for use with water temperatures up to 75°C
Features the Gardiner Jet Capsule System
Comes with 1 set of jet capsules, jet hose and T Connector in the price
If using fanjets, some bristles may need trimming to allow full spray width

Please select Jets below

1 in stock

£0.00

2 x 2mm Pencil Jet Capsules Black c/w Brush

19 in stock

£0.00

2 x Fan Jet Capsule Red 50 Degree c/w brush

9 in stock

£0.00

2 x Fan Jet Capsule 100 Degree Grey c/w brush

7 in stock

£0.00

2 x 3mm Jet Capsules Green c/w Brush

2 x 3mm Jet Capsules Green c/w Brush

10 in stock

£0.00

2 x 1.4mm Jet Capsules Blue c/w Brush

2 x 1.4mm Jet Capsules Blue c/w Brush

4 in stock

SKU: SUPS23 Category:

Description

Supreme™ – Extra wide splaying bristles – feels very soft and easy on the glass whilst also providing some sill cleaning ability. Minimum pressure needed to achieve an easy splay of bristles with low frame impact due to compact & rounded edge stock design.

Dual Trim – inner bristles are a shorter length – allows for easy splay
Stiff Bristles – Suitable for hot water cleaning
Stock Dimensions – 232mm x 37mm, Bristle Dimensions – 29cm (11.5″) x 12cm (5″)
Large Bristle Splay Area – 348cm² – increases to 448cm² under full working pressure
Suitable for rinsing on the glass
Weight = 190g (bare brush stock)
Features the Gardiner Jet Capsule System
Comes with 1 set of jet capsules, jet hose and T Connector in the price
Suitable for use with water temperatures up to 75°C
If using fanjets, some bristles may need trimming to allow full spray width
If using this brush on a pole with a Swivel Gooseneck – you will need to pull out a little more of the gooseneck hose from the gooseneck and put an O-Clip around it so that it doesn’t pull back through the gooseneck and impede the swivel action, this will also prevent damage to the Jet Capsule
If using this brush on a pole equipped with a pull on/off internal flow valve, such as a Univalve – you will need to have a hose clip or similar fitted above the gooseneck to prevent the gooseneck hose being pulled back into the pole which would tug on the jets and could lead to damage of the jets with long term use. Such damage would not be covered under warranty
Six month manufacturing defect warranty