Xtreme Sill Brush 35 cm Stiff

£45.00 Ex VAT

Xtreme Sill Stiff – The lightest Sill brush – everything pared down to the bare minimum to provide good window & sill cleaning with no extra weight.  For those who need light weight above longevity.

1 set of Jetcaps comes with this brush please choose from the options below. (If more than one set chosen 2mm Jet Caps will be added)

1 in stock

4 x 2mm Pencil Jet Capsules Black c/w brush

£0.00

Out of stock

4 x Fan Jet Capsule Red 50 Degree c/w brush

£0.00

1 in stock

4 x Fan Jet Capsules 100 Degree Grey c/w Brush

£0.00

Out of stock

4 x 1.4mm Jet Capsules Blue c/w Brush

£0.00

4 x 1.4mm Jet Capsules Blue c/w Brush

Out of stock

4 x 3mm Jet Capsules Green c/w Brush

£0.00

4 x 3mm Jet Capsules Green c/w Brush

2 in stock

SKU: XTRSILL35ST Category:

Description

Xtreme Sill Brush 35 cm Stiff

  • Ultra Lightweight Window Cleaning Brush – 175g
  • Dual Trim – ‘Stiff‘ feel
  • Bristles – Inner & Outer Stiff Synthetic
  • Good for hot water
  • Comes with 1 x 4 set of Jet Capsules in the price
  • If using fanjets, some bristles may need trimming to allow full spray width
  • Supplied with T Connector & Jet Hose if jets selected
  • Water temperature suitability= Up to 70°
  • Important: These brushes need 13mm screws to be used when fitting a brush socket – not the standard 16mm screws
  • If using this brush on a pole with a Swivel Gooseneck  – you will need to pull out a little more of the gooseneck hose from the gooseneck and put an O-Clip around it so that it doesn’t pull back through the gooseneck and impede the swivel action, this will also prevent damage to the Jet Capsule
  • If using this brush on a pole equipped with a pull on/off internal flow valve, such as a Univalve  – you will need to have a hose clip or similar fitted above the gooseneck to prevent the gooseneck hose being pulled back into the pole which would tug on the jets and could lead to damage of the jets with long term use. Such damage would not be covered under warranty
  • Six month manufacturing defect warranty