Universal Sill Flocked Brush 26cm c/w 2 Jet caps

£40.00 Ex VAT

Universal Sill Brush 26cm – Flocked

One set of Jet Capsules supplied with brush.
Please select below:

9 in stock

2 x 2mm Pencil Jet Capsules Black c/w Brush

£0.00

141 in stock

2 x 1.4mm Jet Capsules Blue c/w Brush

£0.00

2 x 1.4mm Jet Capsules Blue c/w Brush

27 in stock

2 x 3mm Jet Capsules Green c/w Brush

£0.00

2 x 3mm Jet Capsules Green c/w Brush

28 in stock

2 x Fan Jet Capsule Red 50 Degree c/w brush

£0.00

38 in stock

2 x Fan Jet Capsule 100 Degree Grey c/w brush

£0.00

149 in stock

SKU: UNIF26 Categories: ,

Description

Universal Flocked Brush 26cm c/w 2 Jet caps

  • Cleans all-round windows, frames, sills and recesses – 225g
  • Maximum bristle width – 32cm
  • Single Trim Flocked Bristles- ‘Medium-Soft‘ feel – side bristles not flocked
  • Suitable for use with water temperatures up to 45°C
  • If using fanjets, some bristles may need trimming to allow full spray width
  • With Jet Capsule System
  • Comes with 1 pair of jet capsules in the price
  • Supplied with T Connector & Jet Hose if jets selected
  • Please note that this brush is only compatible with Jet Capsules – not previous design jets

 

 

  • Medium-Soft Flocked Bristles
  • Please note that the blue & black side bristles are not flocked – exercise care if using these side bristle on painted or delicate surfaces
  • Suitable for rinsing off the glass
  • Weight = 225g (bare brush stock)
  • Width = 26cm – 10″
  • If using with wide fanjets it may be necessary to trim surrounding inner bristles to allow fan to jet sideways fully
  • If using this brush on a pole with a Swivel Gooseneck  – you will need to pull out a little more of the gooseneck hose from the gooseneck and put an O-Clip around it so that it doesn’t pull back through the gooseneck and impede the swivel action, this will also prevent damage to the Jet Capsule
  • If using this brush on a pole equipped with a pull on/off internal flow valve, such as a Univalve  – you will need to have a hose clip or similar fitted above the gooseneck to prevent the gooseneck hose being pulled back into the pole which would tug on the jets and could lead to damage of the jets with long term use. Such damage would not be covered under warranty
  • Registered Design
  • Six month manufacturing defect warranty