Xtreme Sill Brush 35cm Du Pont Taper Tec Hybrid

£53.00 Ex VAT

Xtreme Sill Brush 35cm Du Pont Taper Tec Hybrid c/w 4 Jet Caps

Please choose Jet Caps required, only 1 set with each brush

7 in stock

4 x 2mm Pencil Jet Capsules Black c/w brush

£0.00

7 in stock

4 x Fan Jet Capsule Red 50 Degree c/w brush

£0.00

29 in stock

4 x Fan Jet Capsules 100 Degree Grey c/w Brush

£0.00

7 in stock

4 x 3mm Jet Capsules Green c/w Brush

£0.00

4 x 3mm Jet Capsules Green c/w Brush

8 in stock

4 x 1.4mm Jet Capsules Blue c/w Brush

£0.00

4 x 1.4mm Jet Capsules Blue c/w Brush

6 in stock

SKU: XTRSILL35DPTT Categories: ,

Description

Xtreme Sill Brush 35cm Du Pont Taper Tec Hybrid

 Xtreme Sill Brush– Our lightest Sill brush – everything pared down to the bare minimum to provide good window & sill cleaning with no extra weight. Comes complete with new Side Bumpers. For those who need light weight above longevity.

  • Ultra Lightweight Window Cleaning Brush – 165g
  • Dual Trim – ‘Medium Soft‘ feel
  • Bristles – Outer Medium Synthetic – Inner Soft TaperTec™ for extra cleaning power
  • Good for cold or warm water
  • Optional clip-on Side Brush Bumpers available (adds 7g)
  • Comes with 1 set of Jet Capsules in the price (2 pairs a cost option)
  • If using fanjets, some bristles may need trimming to allow full spray width
  • Supplied with T Connector & Jet Hose if jets selected
  • Comes with 1 set of 4 jet capsules, jet hose and T Connector in the price
  • Water temperature suitability= Up to 30°
  • Important: These brushes need 13mm screws to be used when fitting a brush socket – not the standard 16mm screws
  • If using this brush on a pole with a Swivel Gooseneck  – you will need to pull out a little more of the gooseneck hose from the gooseneck and put an O-Clip around it so that it doesn’t pull back through the gooseneck and impede the swivel action, this will also prevent damage to the Jet Capsule
  • If using this brush on a pole equipped with a pull on/off internal flow valve, such as a Univalve  – you will need to have a hose clip or similar fitted above the gooseneck to prevent the gooseneck hose being pulled back into the pole which would tug on the jets and could lead to damage of the jets with long term use. Such damage would not be covered under warranty
  • Six month manufacturing defect warranty
  • UKIPO Registered Design NO.6060374