Universal Sill Brush 26cm – Medium Soft c/w 2 Jet Capsules

£37.00

Cleans all-round windows, frames, sills and recesses – 245g
With Jet-Capsule jet system – comes with choice of jet types
Supplied with T Connector & Jet Hose if jets selected
Maximum bristle width – 32cm
Dual Trim – ‘Medium-Soft’ feel
Suitable for use with water temperatures up to 45°C
Click here for our Brush Guide pages
If using fanjets, some bristles may need trimming to allow full spray width
Please note that this brush is only compatible with Jet Capsules – not previous design jets

Please select jets below

5 in stock

£0.00

2 x 2mm Pencil Jet Capsules Black c/w Brush

19 in stock

£0.00

2 x Fan Jet Capsule Red 50 Degree c/w brush

9 in stock

£0.00

2 x Fan Jet Capsule 100 Degree Grey c/w brush

7 in stock

£0.00

2 x 3mm Jet Capsules Green c/w Brush

2 x 3mm Jet Capsules Green c/w Brush

10 in stock

£0.00

2 x 1.4mm Jet Capsules Blue c/w Brush

2 x 1.4mm Jet Capsules Blue c/w Brush

4 in stock

SKU: UNIMEDS26 Category:

Description

Universalâ„¢ Sill – A robust ‘all round’ cleaning brush for getting into every corner, frame and sill – clean everything from one brush. Robust side bristles to protect the brush from impact and abrasion in use. Also popular for Soffits, Facias, Gutters and Conservatory Roofs.

Universal Sill Brush Design – Cleans all-round windows, frames, sills and recesses
Dual Trim – inner bristles are a shorter length – allows for easy splay
Medium-Soft Bristles
Suitable for rinsing on the glass
Weight = 245g (bare brush stock)
Width = 26cm – 10″
Suitable for use with water temperatures up to 45°C
If using with wide fanjets it may be necessary to trim surrounding inner bristles to allow fan to jet sideways fully
If using this brush on a pole with a Swivel Gooseneck – you will need to pull out a little more of the gooseneck hose from the gooseneck and put an O-Clip around it so that it doesn’t pull back through the gooseneck and impede the swivel action, this will also prevent damage to the Jet Capsule
If using this brush on a pole equipped with a pull on/off internal flow valve, such as a Univalve – you will need to have a hose clip or similar fitted above the gooseneck to prevent the gooseneck hose being pulled back into the pole which would tug on the jets and could lead to damage of the jets with long term use. Such damage would not be covered under warranty
Patent Pending & Registered Design
Six month manufacturing defect warranty