Gardiner Micro Jet Rinse Bar 26cm

£17.50 Ex VAT

  • 32 micro jets provide precise but gentle rinsing with brush on the glass
  • Lightweight at 41 g

1 in stock

Description

Gardiner Micro Jet Rinse Bar

  • 32 micro jets provide precise but gentle rinsing with brush on the glass
  • Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme)
  • Provides over-bristle micro jet rinsing
  • Needs a higher flow rate than standard pencil or Fanjets – recommended 2.5lpm – 3lpm
  • Height of jets can be adjusted
  • Can be used with internal brush jets as well
  • Lightweight at 41g
  • Uses John Guest connections on unit
  • Uses standard Brush T Connector and jet hose
  • Needs 2 longer screws to allow it to be attached between brush body and brush socket (if used on standard brushes, will need 19mm screws)
  • If using on Ultimate, Super-Lite, Universal, & Supreme then the standard 16mm screws will need replacing with 19mm screws
  • If using on Xtreme brushes then the standard 13mm screws will need replacing with 16mm screws
  • Please note: The rinse bar does not come with the brush & gooseneck pictured