PRF RO Membrane 750 (High Yield)

SKU: PRF750MEM

PRF RO & Merlin Replacement Membrane 750 (High Yield)

 

The  PRF-750-RO membrane is designed for on-demand RO water systems that operate off mains pressure and will significantly improve permeate flow and system recovery.

This capability meets the production requirements of light commercial applications such as window washing, aquatics, boiler feeds and applications that can require a flow rate up to 1.7 lpm.

This membrane is an upgrade alternative to the PENTAIR TLC-350 membrane which is supplied with our standard PRF-RO System.

With two PRF-750-RO membranes incorporated into a PRF-750 System, the high flow membranes work in series to produce on average 70% more water than the TLC-350 membrane.

The design of this system also enables the concentrate from one membrane to be channelled through the second on the system, allowing waste water to be reduced by approximately 75% compared to conventional systems.

Key Product Features

  • Average rejection rate of 94% at 2.8 bar
  • Works with mains pressure (2.8 bar) requiring no pump when installed in the PRF-750 System
  • 70% more water output, with a rate of 1.7 lpm over the TLC-350 1 lpm
  • Typically used for boiler feed, spot free window wash finish, aquatics and plating bath top-up

Each PRF RO Unit has 1 x 17″ Carbon/Sedi Filter and 2 x Membranes

You will need 2 x membranes for replacement PRF & Merlin RO units

17 in stock

£162.00 Ex VAT

17 in stock

Wishlist 0
Continue Shopping