Gardiner Micro Jet Rinse Bar
- 32 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme)
- Provides over-bristle micro jet rinsing
- Needs a higher flow rate than standard pencil or Fanjets – recommended 2.5lpm – 3lpm
- Height of jets can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 41g
- Uses John Guest connections on unit
- Uses standard Brush T Connector and jet hose
- Needs 2 longer screws to allow it to be attached between brush body and brush socket (if used on standard brushes, will need 19mm screws)
- If using on Ultimate, Super-Lite, Universal, & Supreme then the standard 16mm screws will need replacing with 19mm screws
- If using on Xtreme brushes then the standard 13mm screws will need replacing with 16mm screws
- Please note: The rinse bar does not come with the brush & gooseneck pictured
