Sill Brush 24cm – Medium Soft c/w 2 Jet Caps

£36.00 Ex VAT

Great for cleaning windows and sills – 225g
Dual Trim – ‘Medium-Soft’ feel
Suitable for use with water temperatures up to 45°C
Click here for our Brush Guide pages
With Jet-Capsule jet system – comes with choice of jet types
If using fanjets, some bristles may need trimming to allow full spray width
Please note that this brush is only compatible with Jet Capsules – not previous design jets

Please select Jets below

26 in stock

2 x 2mm Pencil Jet Capsules Black c/w Brush

£0.00

264 in stock

2 x Fan Jet Capsule Red 50 Degree c/w brush

£0.00

18 in stock

2 x Fan Jet Capsule 100 Degree Grey c/w brush

£0.00

129 in stock

2 x 1.4mm Jet Capsules Blue c/w Brush

£0.00

2 x 1.4mm Jet Capsules Blue c/w Brush

23 in stock

2 x 3mm Jet Capsules Green c/w Brush

£0.00

2 x 3mm Jet Capsules Green c/w Brush

20 in stock

SKU: SILLMED24 Category:

Description

Sill Medium Mix Dual Trim Brush 24cm

  • Great for cleaning windows and sills – 220g
  • Dual Trim – ‘Medium-Soft‘ feel
  • Suitable for use with water temperatures up to 45°C
  • Comes with Gardiner Jet Capsule System – comes with choice of jet types. If more than 1 set of jet capsules are selected only 2mm pencil jets will be sent with the brush
  • If using fanjets, some bristles may need trimming to allow full spray width
  • Dual Trim – inner bristles are a shorter length – allows for easy splay
  • Medium-Soft Bristles
  • Excellent cleaning power for first cleans, leaded, gutters, soffits & conservatory roofs
  • Suitable for rinsing on the glass
  • Weight = 220g (bare brush stock)
  • Width = 24cm – 9″
  • Suitable for use with water temperatures up to 45°C
  • If using with wide fanjets it may be necessary to trim surrounding inner bristles to allow fan to jet sideways fully
  • If using this brush on a pole with a Swivel Gooseneck  – you will need to pull out a little more of the gooseneck hose from the gooseneck and put an O-Clip around it so that it doesn’t pull back through the gooseneck and impede the swivel action, this will also prevent damage to the Jet Capsule
  • If using this brush on a pole equipped with a pull on/off internal flow valve, such as a Univalve  – you will need to have a hose clip or similar fitted above the gooseneck to prevent the gooseneck hose being pulled back into the pole which would tug on the jets and could lead to damage of the jets with long term use. Such damage would not be covered under warranty
  • Patent Office Registered Design No. 4020749
  • Six month manufacturing defect warranty

Please note that this brush is only compatible with Jet Capsules – not previous design jets