Xtreme Brush 35cm Du Pont Taper Tec c/w 4 Jet Caps

£42.00 Ex VAT

Xtreme Brush 35cm Du Pont Taper Tec c/w 4 Jet Caps

One set of Jet capsules supplied with Brush, if more than 1 set is chosen 2mm pencil jet caps will be supplied
Please choose below

2 in stock

4 x 2mm Pencil Jet Capsules Black c/w brush

£0.00

5 in stock

4 x 1.4mm Jet Capsules Blue c/w Brush

£0.00

4 x 1.4mm Jet Capsules Blue c/w Brush

6 in stock

4 x 3mm Jet Capsules Green c/w Brush

£0.00

4 x 3mm Jet Capsules Green c/w Brush

8 in stock

4 x Fan Jet Capsule Red 50 Degree c/w brush

£0.00

26 in stock

4 x Fan Jet Capsules 100 Degree Grey c/w Brush

£0.00

7 in stock

SKU: XTR35DHYDTT Category:

Description

Xtreme Brush 35cm Du Pont Taper Tec c/w 4 Jet Caps

 

TAPER TEC – finely tapered synthetic bristles with a dual height and dual bristle tip type. The very finely tapered bristles tips mimic the effect of natural bristle material such as boars hair, but with greater consistency. This allows for a soft feel that reacts on a very minute level with the dirt adhering to the glass surface. The slightly shorter blunt end bristles in each bunch then can act more aggressively when pushed slightly harder into the glass.

  • New DuPont TaperTec version of this brush
  • Introductory Price
  • Ultra Lightweight Brush (120g)
  • Dual Trim – ‘Medium Soft‘ feel
  • Bristles – Outer Medium Synthetic – Inner Soft TaperTec™ for extra cleaning power
  • Suitable for use with water temperatures up to 30°C
  • With Jet Capsule Jet System – comes with choice of jet types
  • Comes with 1 set of 4 jet capsules in the price
  • Supplied with T Connector & Jet Hose if jets selected
  • Important: These brushes need 13mm screws to be used when fitting a brush socket – not the standard 16mm screws
  • Weight = 120g (bare brush stock)
  • Width = 35cm – 14″
  • If using this brush on a pole with a Swivel Gooseneck  – you will need to pull out a little more of the gooseneck hose from the gooseneck and put an O-Clip around it so that it doesn’t pull back through the gooseneck and impede the swivel action, this will also prevent damage to the Jet Capsule
  • If using this brush on a pole equipped with a pull on/off internal flow valve, such as a Univalve  – you will need to have a hose clip or similar fitted above the gooseneck to prevent the gooseneck hose being pulled back into the pole which would tug on the jets and could lead to damage of the jets with long term use. Such damage would not be covered under warranty
  • Six month manufacturing defect warranty