Ultimate Brush 35cm – Stiff c/w 4 Jet Caps

£42.00 Ex VAT

Ultimate Brush 35cm – Stiff c/w 4 Jet Caps

Please choose Jet Caps required

1 Set of Jets comes with the brush.
If more than 1 set is chosen 2mm pencil jets will be supplied with the brush

9 in stock

4 x 2mm Pencil Jet Capsules Black c/w brush

£0.00

5 in stock

4 x 1.4mm Jet Capsules Blue c/w Brush

£0.00

4 x 1.4mm Jet Capsules Blue c/w Brush

6 in stock

4 x 3mm Jet Capsules Green c/w Brush

£0.00

4 x 3mm Jet Capsules Green c/w Brush

8 in stock

4 x Fan Jet Capsule Red 50 Degree c/w brush

£0.00

26 in stock

4 x Fan Jet Capsules 100 Degree Grey c/w Brush

£0.00

7 in stock

SKU: ULTS35 Category:

Description

Ultimate Stiff Brush 35cm c/w 4 Jet Cap (2mm)

A lightweight everyday brush with more compact bristle length. An excellent balance between light weight, glass coverage & longevity

  • Ultimate balance between weight, coverage & durability – 235g
  • Dual Trim – ‘Stiff‘ feel
  • Bristles – Inner/Outer Stiff Synthetic – for use with Hot Water
  • Suitable for use with water temperatures up to 75°C
  • Comes with 1 set of 4 Jet Capsules
  • If using fanjets, some bristles may need trimming to allow full spray width
  • Supplied with Socket, T Connector & Jet Hose
  • Dual Trim – inner bristles are a shorter length – allows for easy splay
  • Stiff Bristles – Best for use with Hot Water
  • Suitable for rinsing on the glass
  • Weight = 235g (bare brush stock)
  • Width = 35cm – 14″
  • These brushes feature four sets of twin jet holes to allow fitment of a choice of jets, ie, 4x fan jets or 4x pencil jets
  • If using with wide fanjets it may be necessary to trim surrounding inner bristles to allow fan to jet sideways fully
  • If using this brush on a pole with a Swivel Gooseneck  – you will need to pull out a little more of the gooseneck hose from the gooseneck and put an O-Clip around it so that it doesn’t pull back through the gooseneck and impede the swivel action, this will also prevent damage to the Jet Capsule
  • If using this brush on a pole equipped with a pull on/off internal flow valve, such as a Univalve  – you will need to have a hose clip or similar fitted above the gooseneck to prevent the gooseneck hose being pulled back into the pole which would tug on the jets and could lead to damage of the jets with long term use. Such damage would not be covered under warranty
  • Six month manufacturing defect warranty