Quick Loq Gooseneck Valve Twist Action – New Design
- Gardiner Gooseneck Valve with Twist Action – Patented Inner Valve Technology
- “Control is not letting go” – Maintain full ‘two-hand’ control of the pole whilst controlling the water flow
- Simple and fast twist to actuate action – Twist clockwise on the handle to open and twist anti-clockwise on the handle to close
- Twist on at the top LH corner of the window and Twist off on the bottom RH corner
- Adjustable Tension Control to allow for different brush sizes and pole heights
- Maximum recommended pole height – 50ft
- Maximum recommended water temperature 70°C
- Can be operated with your hand for use on ground floor windows
- Improves speed of water control compared to a manual valve
- Quick-LoQ® brush connection
- No servicing needed – no O rings to grease or grub screws to adjust
- Not compatible with the Super-scraper system
- 6 month operational warranty on inner valve
- 12 month warranty on outer structural parts
- US Patents 5799987 – 5937885
- Weight – 130g (33g more than a standard Angle Adapter)
- Fitting Instructions
- Remove old gooseneck from the pole
- Take the hose coming up the pole and push-fit into the 8mm push fit connector o the base of the gooseneck valve assembly
- Slide the gooseneck valve into the top of the pole, push fully in and close the top clamp – ensure that the top pole clamp is firmly tightened so that it holds the gooseneck valve base with it being able to spin
- Fit a brush to the top of the gooseneck valve and connect the brush T connector to the top piece of tube from the valve
- Before first use ensure that all of the pole clamps are correctly tightened – it is important that the pole clamps firmly clamp the pole sections when using this valve
- adjust the gooseneck valve adjuster so that it operate with the desired force needed – TIP, when working at height this will need to be loosened off compared to ground and first floor work
How to Operate
- Extend the pole to the window, position the brush in the top left hand corner of the window and twist the pole to the right (clockwise from the pole base)
- When finished position the brush head on the bottom right hand corner of the window and twist the pole to the left (anti-clockwise from the pole base)
- Move to the next window and repeat
Troubleshooting
- Water is not flowing through the device – ensure that the device is turned on, check the device is not frozen, the unit could have a dirt blockage to clear remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
- Water is not shutting off using the device – ensure that the device is firmly clamped in the top section of the pole. The unit could have a dirt blockage to clear – remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
- The unit is too stiff to operate – loosen the bolt cap adjuster until desired tension is reached
- The unit is too loose and turns off too easily – tight the bolt cap adjuster until the desired tension is reached
