Ultimate Brush 35cm – Medium Soft 4 x Jet Capsule

£43.00 Ex VAT

A lightweight everyday brush with more compact bristle length.
An excellent balance between light weight, glass coverage & longevity

Please choose jets required.

1 Set of 4 Jets c/w Brush, if more than 1 set is selected 2mm Pencil Jets will be sent with brush

16 in stock

4 x 1.4mm Jet Capsules Blue c/w Brush

£0.00

4 x 1.4mm Jet Capsules Blue c/w Brush

Out of stock

4 x 3mm Jet Capsules Green c/w Brush

£0.00

4 x 3mm Jet Capsules Green c/w Brush

2 in stock

4 x Fan Jet Capsule Red 50 Degree c/w brush

£0.00

1 in stock

4 x Fan Jet Capsules 100 Degree Grey c/w Brush

£0.00

Out of stock

SKU: ULTMEDS35 Category:

Description

Ultimate Brush 35cm – Medium Soft 4 x Jet Capsule

  • Ultimate balance between weight, coverage & durability – 237g
  • Dual Trim – ‘Medium Soft‘ feel
  • Bristles – Inner Soft, Outer Medium Synthetic
  • Suitable for use with water temperatures up to 45°C
  • Comes with 1 set of 4 Jet Capsules
  • If using fanjets, some bristles may need trimming to allow full spray width
  • Supplied with T Connector & Jet Hose if jets selected

 

  • Dual Trim – inner bristles are a shorter length – allows for easy splay
  • Suitable for rinsing on the glass
  • Weight = 237g (bare brush stock)
  • Width = 35cm – 14″
  • Suitable for use with water temperatures up to 45°C
  • Features the Gardiner Jet Capsule System
  • If using with wide fanjets it may be necessary to trim surrounding inner bristles to allow fan to jet sideways fully
  • If using this brush on a pole with a Swivel Gooseneck  – you will need to pull out a little more of the gooseneck hose from the gooseneck and put an O-Clip around it so that it doesn’t pull back through the gooseneck and impede the swivel action, this will also prevent damage to the Jet Capsule
  • If using this brush on a pole equipped with a pull on/off internal flow valve, such as a Univalve  – you will need to have a hose clip or similar fitted above the gooseneck to prevent the gooseneck hose being pulled back into the pole which would tug on the jets and could lead to damage of the jets with long term use. Such damage would not be covered under warranty
  • Six month manufacturing defect warranty