NEW Gardiner Micro Jet Rinse Bar – Low pressure

£17.50 Ex VAT

Gardiner Micro Jet Rinse Bar – Low pressure

C/W Push Fit T connector and 19mm screws

2 in stock

Description

  • 16 micro jets provide precise but gentle rinsing with brush on the glass
  • Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or
    Supreme)
  • Provides over-bristle micro jet rinsing
  • Flow rate is half that of the standard micro-jet rinse-bar and about equivalent to standard pencil or
    Fanjets – recommended 1.5 – 2lpm
  • Jet angle is 3° higher than standard rinsebar to allow for lower flow rates
  • Height of jets can be adjusted
  • Can be used with internal brush jets as well
  • Lightweight at 41g
  • Uses John Guest connections on unit
  • Uses standard Brush T Connector and jet hose – optional extra
  • Needs 2 longer screws to allow it to be attached between brush body and brush socket (if used on standard
    brushes, will need 19mm screws)